Handling a Unexpected Hot Water System Shutdown: Essential Steps
Handling a Unexpected Hot Water System Shutdown: Essential Steps
Blog Article
How do you actually feel in relation to How to Troubleshoot and Repair an Electric Water Heater?
Many modern-day residences make use of an electric water heater for their heating system, as a result of its comfort and also simplicity of use. However, similar to any other electric appliances, problems might arise with its usage, suddenly. It can be really aggravating to awaken to a chilly shower instead of a warm one or having your bath with water that isn't warm enough or perhaps also warm. Whatever the situation might be, hot water heater problems can be fairly stressful. The good news is, we have actually made a listing of possible options to your water heater issues. There are a variety of factors that might create many of these troubles, maybe a problem with the power supply, the electrical burner, or the thermostat. Prior to doing anything, guarantee you shut off the main power supply for safety and security. Whatever the trouble is, getting it repaired should not present too much of an issue if you follow these steps:
Call A Specialist:
If after replacing all damaged components as well as resetting your temperature, the water heater still isn't functioning, you may require to call an expert plumber for a specialist viewpoint. The trouble with your heating unit could be that the cold and hot taps have actually been switched or it might be undersized for the quantity of hot water needed in your house. Whatever the situation might be, a professional plumber would certainly help address the issue.
Examine Your Power Supply:
As fundamental as this may appear, it is really required. Without ample power, your water heater will certainly not operate. So the first thing to do when your water all of a sudden retires is to confirm that it isn't a power issue. Examine if the fuse is blown out or the breaker stumbled. If the circuit breaker is the problem, merely turn it off and on once again. Change any busted or damaged fuse. Test the home appliance with power after these changes to see if it's now working.
Examine Your Thermostat:
If your water heater still isn't working or the water appearing isn't warm enough, you might require to check the temperature setups on your top thermostat. Ensure the circuit breaker is turned off prior to doing anything. Open up the gain access to panel as well as press the red button for temperature reset above the thermostat. This should aid heat up the water. Turn the breaker back on and check if the problem has actually been settled.
Inspect the Heating Element in the Hot Water Heater:
If it's not a power issue, then attempt checking out your burner if it is still functioning. Test each of your burner to ensure the issue isn't with any of them. If any one of them is defective, replace that part and then inspect whether the hot water is back on.
Verdict
Water heater issues are not always major. Most of them are due to small issues like a blown fuse or worn-out heating element. Replacing the faulty parts should suffice. Nonetheless, if you are still incapable to fix the issue, give a call to your nearby plumber to find to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Do you like reading up on No Hot Water — Water Heater Repair? Place a short review down the page. We will be glad to listen to your thoughts about this post. We hope that you come back again in the future. Sharing is caring. You never know, you may just be doing someone a favor. Thank you so much for your time invested reading it.
Expert plumbing diagnostics and repair. Report this page